Skip to content
Bunny Rabbit Soft Toy
Plush Toys & Soft Toys

Personalised Bunny Rabbit Soft Toy with Name and Custom Embroidery

39.50€

incl. VAT, plus shipping

Colour: Bunny

Quantity

You choose the embroidery area and size afterwards in the Real View Customizer.

  • Cream white Zippie bunny rabbit
    The Mumbles MM050 is made from soft polyester plush, measures approximately 45 cm and features long floppy ears, a pink nose and a pale tummy panel.
  • 130 × 130 mm tummy embroidery area
    Add up to five lines with a name, birth details, custom text or motif. Around 16 characters fit through the centre, with about 10 recommended at the top and bottom.
  • Custom embroidery with no minimum order
    Personalise the bunny with a name, message, motif, company logo or club badge. The removable inner cushion supports professional tummy embroidery.
Design Now!
Custom embroidery

Your logo or design, embroidered onto this textile.

Preview before you order

See your design in the Real View Customizer before you order.

From 1 piece

One piece or a whole team — you choose the quantity.

Size chart

Size AB
Onesize38 cm20 cm

Which embroidery position suits a logo, name or text?

Every product has its own embroidery areas for each view — front, back, left and right. Which ones and how large they are depends on the product; the Real View Customizer always shows you the actual area while you design.

Embroidery positions of the products on this page, their maximum embroidery area and what they are particularly suitable for
Embroidery position Maximum embroidery area Particularly suitable for
Front Ø 140 mm Company logo, club crest, brand logo, team logo, name or statement

The sizes are the embroidery areas of this product. While you design, the Real View Customizer shows you each area exactly.

Embroidery tip: The largest possible area is not automatically the best size. Legibility and proportion are what matter. In our experience a classic chest logo already looks balanced at about 70 to 100 mm wide, elongated company logos at about 100 to 130 mm depending on the design. There is a hard lower limit only for lettering: letters under 5 mm high can no longer be rendered cleanly in thread — so the Real View Customizer does not allow them.

In detail

More about this product

Personalised bunny soft toy with custom embroidery: add a name, birth details or your own logo

Let us be honest, a bunny is easy to give as a present. It becomes personal when it carries the child’s real name, birth details or a message chosen especially for them.

The cream white Mumbles MM050 Zippie Bunny has long floppy ears, a pink nose and a pale tummy for custom embroidery. The centred 130 × 130 mm embroidery area can be personalised with a name, date of birth, time, weight, length, christening date, short message, motif or your own logo. This makes the embroidered bunny suitable as a new baby gift, christening present, birthday gift, starting school keepsake or first Easter gift.

In the Real View Customizer, you choose the font, thread colours and motifs yourself. You can also upload a company logo, club badge or nursery design. The personalised plush bunny is available with no minimum order.

Mumbles MM050 · cream white polyester plush · approx. 45 cm · 130 × 130 mm tummy embroidery area · removable inner cushion · hand wash · EN71 · no minimum order

FeatureProduct information
ModelMumbles MM050 Zippie Bunny
ColourCream, cream white
Material100% polyester plush
SizeOne size, approx. 45 cm
Embroidery positionCentred on the tummy, maximum 130 × 130 mm
StuffingRemovable inner cushion
AccessConcealed zip on the underside
SafetyMeets the requirements of the European EN71 standard according to the manufacturer
CareHand wash after removing the inner cushion
Order quantityNo minimum order

Name and birth details

A first name, date, time, weight and length create a personal reminder of the day the child was born.

Up to five lines of text

The round embroidery area works best with shorter outer lines and longer wording through the middle.

Christening gift

A name, christening date and one small symbol create a calm design that can still feel timeless years later.

First Easter gift

A name, year and subtle Easter motif turn the bunny into a personal keepsake for the first Easter.

Upload your own logo

A company logo, club badge or custom design is checked and prepared as a professional embroidery file where required.

One item or a larger quantity

Single gifts and orders with different names are possible, as are larger personalised runs.

Which details and text lengths fit on the bunny’s tummy?

The embroidery position on the tummy is limited to 130 × 130 mm and is approximately round. This provides more usable width through the centre than at the top and bottom. Five lines of equal length would not use the shape effectively.

Up to five lines of text are possible. As a practical guide, the wider middle lines can contain up to around 16 characters per line. The top and bottom lines should usually remain at up to around 10 characters. The font, capital letters, spaces and wide letters all affect the actual amount of room required.

PositionPractical guideSuitable content
TopUp to around 10 charactersSmall motif, short word or date
Upper middleUp to around 16 charactersFirst name, two part name or short message
CentreUp to around 16 charactersName or most important line
Lower middleUp to around 16 charactersTime, weight and length
BottomUp to around 10 charactersSmall motif, date or year

Our recommendation: Place the name or logo through the wider centre. Small motifs such as a heart, star, baby footprints, crown, carrot or Easter egg work especially well at the top and bottom because they follow the round shape.

Every name needs its own layout check

The number of characters is only a guide. A name containing several wide capital letters requires more space than a line of numbers of the same length. Long two part names can be reduced in size or arranged over two lines.

Before production, we check the font size, line spacing, alignment and motif proportions. The screen preview is a guide. The final embroidery file is adjusted to the actual tummy area.

Personalised bunny for a new baby, christening or first Easter

The occasion determines which details will still matter later. For a new baby gift, the name and birth details are usually the main focus. For a christening, a name, date and one small symbol are often enough. For the first Easter, a year usually remains more meaningful than a long seasonal message.

New baby gift

Name, date of birth, time, weight and length preserve the key details on a personal soft toy.

Baby gift with name and date

A reduced design remains easy to read and leaves enough open space on the pale tummy.

Christening gift with a name

A christening date and a small heart, cross, star or other suitable motif can support the name.

My first Easter

A name, year and small Easter motif create a clear reminder of the child’s first Easter.

Siblings and twins

Several bunnies can share the same style while carrying different names and birth details.

Birthday and starting school

A short wish, encouraging words or one symbol can support the name without overcrowding the design.

How to keep the design meaningful later

Consider which information should still matter in a few years. The name nearly always deserves to remain the main element. A date, year and carefully chosen motif can support it. Several fonts and too many colours rarely make a design feel more personal.

Custom embroidered bunny soft toy with your own logo

The cream white tummy can also carry a company logo, club badge, nursery motif or event design. Add your approved logo from “My designs” in the Real View Customizer and position it on the tummy. A name, number or short additional line can be added when the complete design remains clear within the available area.

An image must become a machine readable embroidery file

An image file contains colours and outlines, but it does not contain instructions for stitch type, direction, sequence or underlay. We therefore check the logo and create a professional embroidery file where required.

Very small lettering, thin lines and fine colour gradients may need to be simplified or enlarged. The completed logo embroidery file remains stored in your customer account and can be used again for future orders.

For larger orders: The shared base design can remain the same while each bunny receives a different name, number or short message. The exact quantity price depends on the order size, motif and number of different personalisations.

Why is the Zippie bunny suitable for professional embroidery?

The zip is located on the underside of the bunny. The inner cushion can be removed through this opening, providing direct access to the back of the tummy panel. The plush outer cover can therefore be prepared for the machine without the stuffing inside.

Plush needs topping and suitable stabilisation

The soft fibres can partly cover small letters and fine outlines. A water soluble topping holds the pile down during embroidery. A suitable stabiliser underneath supports the tummy panel.

The outer cover must not be stretched during hooping. Otherwise, the area can contract after release and the motif may appear wavy. Whether tear away or cut away backing is used depends on the stitch count, motif size and proportion of filled areas.

Size 40 polyester thread

Isacord 40 or Madeira Polyneon 40 are suitable for clear colour and embroidery on a product that will be handled regularly.

Adjust fill stitches carefully

A spacing of approximately 0.40 to 0.45 mm is a useful starting point for many motifs and is adjusted to the individual design.

Keep small lettering readable

For many fonts, practical testing begins at approximately 5 to 6 mm letter height. Letter shape and internal spaces remain decisive.

Test the needle and tension

Depending on the motif, needles in sizes 75/11 or 80/12 are often used. Thread tension is adjusted during a test stitch.

The difference lies in the stitch construction: Good digitising plans the underlay, stitch direction and sequence so the name remains readable, outlines close and the tummy keeps its shape.

Which thread colours suit the white or cream white bunny?

Dark and medium shades provide the most reliable contrast on the pale tummy. Black, dark brown, burgundy, navy and forest green remain clear. Gold, dusty pink, pale blue and sage green create a softer effect but still need enough contrast against the background.

Two or three coordinating colours are usually enough for birth details. The name can carry the strongest colour, while dates and numbers remain calmer. Multicoloured motifs work best as one compact element rather than being spread across every line of text.

Care, safety and delivery time for the personalised bunny

The manufacturer specifies hand wash for the MM050. Open the zip on the underside and remove the inner cushion before cleaning. The plush outer cover must dry completely before the cushion is replaced. A 40 degree machine wash and unlimited wash durability are not stated for this model.

According to the manufacturer, the Zippie Bunny meets the requirements of the European toy safety standard EN71 and is stated as suitable for all age groups. Remove all tags and fastenings before giving the toy to a child. The information on the supplied product label remains the final reference.

When the item is in stock and the design requires no clarification, delivery to Austria and Germany usually takes 2–3 working days from payment. The production time and estimated delivery date shown during checkout apply to the specific order.

From your design to the finished embroidered bunny

  1. Select the Zippie Bunny and open the Real View Customizer.
  2. Enter the name, details or chosen wording and select a suitable embroidery font.
  3. Choose a motif or upload your own logo and select the thread colours.
  4. Arrange the elements within 130 × 130 mm and account for the round embroidery area.
  5. Review the preview. We check readability and technical suitability before production.
  6. After preparation, the bunny is embroidered to your instructions and prepared for dispatch.

Frequently asked questions about the personalised bunny soft toy

Which details and how many characters can be embroidered on the white bunny?

The tummy provides a maximum embroidery area of 130 × 130 mm. Up to five lines can include a name, date of birth, time, weight, length, christening date, year or short message.

As a guide, the wider middle lines can contain up to around 16 characters. Because the area is round, the top and bottom lines should usually contain no more than around 10 characters. The longest information belongs in the centre. Small motifs work well as decoration at the top and bottom.

Can a long two part name be embroidered with birth details?

Yes. A long two part name can be reduced in size or arranged over two lines. The remaining room for the date, time, weight and length depends on the width of the letters, font and chosen motif.

We check the arrangement before production. When the layout becomes too crowded, supporting details can be reduced or rearranged so the name remains clear.

Can the personalised embroidered bunny soft toy be washed?

Yes. Open the concealed zip on the underside and remove the inner cushion. The manufacturer’s official care instruction is hand wash. The outer cover must dry completely before the inner cushion is replaced.

Do not rub hard directly over the thread and outlines and do not use a stiff brush. A 40 degree machine wash or unlimited wash durability is not stated for the MM050.

How quickly is a custom embroidered bunny made and delivered?

When the item is in stock and no clarification is needed, delivery to Austria and Germany usually takes 2–3 working days from payment.

Larger quantities, complex logos or necessary questions about the artwork can increase production time. The delivery date shown during checkout remains the relevant guide.

Is there a minimum order for nurseries, clubs or events?

No. The personalised plush bunny is available with no minimum order. Larger quantities using the same base design can also be ordered for nurseries, clubs, companies or events.

Each bunny can still receive a different name, number or short message. Lower quantity prices may be available depending on the order size, motif and number of different personalisations.

Can I upload my own logo for custom embroidery on the bunny?

Yes. In the Real View Customizer, you can add your approved company logo, club badge, nursery motif or your own design from “My designs” and position it on the tummy.

We check the file and create a professional embroidery file where required. It is adapted technically to the plush surface and embroidery area and remains stored in your customer account for future orders.

Is a bunny with a name suitable for a new baby, christening or first Easter gift?

Yes. For a new baby, the name is often combined with the date of birth, time, weight and length. For a christening, a name, christening date and small symbol work well. For the first Easter, a name, year and subtle Easter motif create a personal keepsake.

The design usually remains relevant for longer when the name is the main element and seasonal wording is kept short.

Is the personalised Zippie Bunny suitable for babies and tested to EN71?

According to the manufacturer, the Mumbles MM050 meets the requirements of the European toy safety standard EN71 and is stated as suitable for all age groups.

Remove all tags and fastenings completely before giving the toy to a child. Follow the age, use and care information supplied on the product label.

A bunny that does not feel interchangeable

The cream white Mumbles MM050 combines a soft cuddly toy with a clearly defined embroidery position on the tummy. A name, birth details, Easter motif or your own logo is stitched directly with thread rather than printed onto the surface.

The key information for your order

The tummy provides 130 × 130 mm for embroidery, with up to five lines of text and the option to upload your own logo. The bunny is available with no minimum order. The inner cushion can be removed through the zip on the underside. The official care instruction is hand wash.

Design your bunny soft toy with a name or your own logo

You choose the name, details, colours and motif, and we take care of building the design properly in thread. In the end, it is not just any bunny, but the one that belongs to this child, gift or shared project.

Design Bunny Rabbit Soft Toy now
Product finder

More textiles from this category

Colour All
For whom All
Category 1
Neckline All
Fastening All
Sleeve length All
Material All
8 products match.
BESTSELLER

Owl soft toy

from 39.50€

incl. VAT, plus shipping

Start designing View

Reviews of this product

About our reviews: Only customers who bought the item from us can review it. Reviews are submitted from the customer account, and we check every review before publishing it.

Be the first to write a review for this product.

Write a review

Please login or register to review

Sign in

With your email address and password. Afterwards you carry on right where you were.

Please enter a valid email address.
Please enter your password.

No account yet? Create an account